Auxiliary Components Bracket, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specification, refer to RIBBED BELT DRIVE ASSEMBLY OVERVIEW .

NOTE:

Replace the seal.

-- Install the A/C compressor, refer to A/C COMPRESSOR - INSTALLING .

-- Fill with coolant, refer to COOLANT, DRAINING AND FILLING .