LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 639 (3.2L - Crankshaft & Cylinder Block - Engine Code(S): CALB) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Drive Plate, Removing And Installing >> Removing

Drive Plate, Removing And Installing: Removing

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locking Drive Plate Using Counterhold - Flywheel 10-201 Tool
GWWA13-10517Courtesy of AUDI OF AMERICA, LLC

-- Insert the Counterhold - Flywheel 10-201 to loosen the bolts.

CAUTION:

The outer surface of the bearing flange at the drive plate could be damaged.

  • Use a multipoint socket wrench with a shaft at least 40 mm long to loosen and tighten the drive plate bolts.

-- Remove the bolts, drive plate and sensor wheel.

scientia non olet · About LEMON Manuals