LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 639 (3.2L - Crankshaft & Cylinder Block - Engine Code(S): CALB) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> Removing

Ribbed Belt TENSIONER, Removing And Installing: Removing

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Cover -1- And Ribbed Belt Tensioner -2-
GWWA13-10516Courtesy of AUDI OF AMERICA, LLC

-- Remove the ribbed belt, refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the cover -1- and the bolt below it.

-- Remove the ribbed belt tensioner -2- from the cylinder block.

scientia non olet · About LEMON Manuals