Nut Versions For The Control Arm And Guide Link Bracket

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Nut Versions For Control Arm And Guide Control Arm Bracket

Courtesy of AUDI OF AMERICA, LLC

Hex - collar nut -A- M12 wrench 21 mm

Tightening specification: 145 Nm

Hex - combination nut -B- M12 18 mm

Tightening specifications: 110 Nm

Hex - combination nut -B- M12 21 mm

Tightening specification: 120 Nm

Hex - combination nut -B- M14 21 mm

Tightening specification: 140 Nm

Wheel bearing housing with different steering arm thickness

Fig 2: Checking Play By Moving Tie Rods And Wheels

Courtesy of AUDI OF AMERICA, LLC

The wheel bearing housing differs in the thickness of the steering arm -2-.