LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 638 (Front Suspension) >> 40 Front Suspension >> SUBFRAME, CROSSBRACE, Stabilizer Bar, Coupling Rod And SUBFRAME Shield >> Stabilizer Bar, Removing And Installing >> Removing

Stabilizer Bar, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation, refer to OVERVIEW - NOISE INSULATION .

-- Disconnect left and right connectors -2-.

Fig 1: Identifying Nuts (Install But Do Not Tighten)
GWWA40-10325Courtesy of AUDI OF AMERICA, LLC

-- Remove the left and right nuts -1- and the clamp -3-.

-- Remove the stabilizer bar.

scientia non olet · About LEMON Manuals