Left Front Body Acceleration Sensor -G341- AND Right Front Body Acceleration Sensor -G342-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
When installing, always pay attention to the installation position of the sensor.
-- Install the sensor -4- as illustrated.
-- Tighten the nuts -1- to 8 Nm.
Tightening specification for the nuts -5- : 5 Nm.