LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 638 (Front Suspension) >> 40 Front Suspension >> Drive Axle >> Outer CV Joint With 88 Mm And 100 Mm Diameter, Servicing >> Outer Cv Joint, Removing

Outer Cv Joint, Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Secure the drive axle in the vise with protective covers.

-- Open both clamping sleeves and remove protective joint boot from outer joint.

-- Strike a copper or brass drift -A- on CV joint inner race with a hammer.

Fig 1: Hitting Copper Or Brass Mandrel Onto Inner Ring Of Constant Velocity Joint
GWWA40-0486Courtesy of AUDI OF AMERICA, LLC

-- Remove joint and protective joint boot.

scientia non olet · About LEMON Manuals