Rim Radial And Lateral Run-Out, Checking: Notes

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Mount the rim on the wheel balancer.

NOTE:

Be careful not to scratch off the glued- on wheel trim on these rims.

The surface of the wheel trim is very sensitive.

The rim will have be replaced if the wheel trim is damaged.

The wheel trim cannot be replaced.

Fig 1: Identifying Wheel Rims With Glued-On Wheel Trim

Courtesy of AUDI OF AMERICA, LLC

-- Use the Wheel Centering System Adapter VAS5271.

-- Preload tire dial gauge approximately 2 mm.

-- Turn the rim slowly.

-- Note the smallest and the largest dial readings.

Fig 2: Identifying Areas To Check Wheel For Radial Run-Out & Lateral Run-Out

Courtesy of AUDI OF AMERICA, LLC

S -

Lateral Run-Out

H -

Radial Run-Out

-- Compare determined value with specifications in the table.

NOTE:

Peak values on the tire dial gauge due to small irregularities may be disregarded.