Front Wheel Drive

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Specifications valid for all engine versions

Front Axle

Standard suspension (2MF) ⁽¹⁾

Sport suspension (1BV)

Camber

- 49' ± 23'

Maximum permissible difference between both sides

30'

Toe per wheel (adjustment value)

+ 10' ± 5'

Toe per wheel (control value)

+ 10' ± 7'

Toe angle difference at 20 degrees⁽²⁾

1° 49' ± 30'

Outer wheel steering angle at maximum steering angle

33° 30' ^{+ 1° 30'}_{- 2°}

Inner wheel steering angle at maximum steering angle

39° 54' ^{+ 1° 30'}_{- 2°}

⁽¹⁾	ECE without Russia.

⁽²⁾	Wheel stop on outer wheel is reduced by this amount. It can also be indicated negatively in alignment computer, depending on manufacturer.

Rear Axle	Standard suspension (2MF)	Sport suspension (1BV)
Camber	- 1°20' ± 25'	- 1°20' ± 25'
Maximum permissible difference between both sides	30'	30'
Toe per wheel (adjustment value)	+ 10' ± 5'	+ 10' ± 5'
Toe per wheel (control value)	+ 10' ± 5'	+ 10' ± 5'
Maximum permissible deviation in direction of travel relative to vehicle longitudinal axis	10'	10'