Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Adaptive Cruise Control Sensor -G550-, removing without bracket .

Fig 1: Release Bracket And Remove Air Intake Grille

Courtesy of AUDI OF AMERICA, LLC

-- Release the bracket -1- and remove the air intake grille -2-.

-- Turn the nuts -2- approximately 45° in direction of -arrow- and remove the Adaptive Cruise Control Sensor -G550- -1- with the stud bolts from the nuts -2-.

Fig 2: Removing Nuts And Removing Adaptive Cruise Control Sensor

Courtesy of AUDI OF AMERICA, LLC

-- Release the connector -3- and remove it from the Adaptive Cruise Control Sensor -G550- -1-.

-- Remove the Adaptive Cruise Control Sensor -G550- -1- forward through the bumper cover.

Adaptive Cruise Control Sensor -G550-, removing with bracket .

Fig 3: Removing Adaptive Cruise Control Sensor Forward Through Bumper Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove the screws -1- and -2-, disconnect the connector -3-, free up the wiring harness and remove the Adaptive Cruise Control Sensor -G550- -4- with the bracket through the bumper cover.

Remove the cover from the Adaptive Cruise Control Sensor -G550- .

Fig 4: Removing Bolts And Disconnecting Harness

Courtesy of AUDI OF AMERICA, LLC

-- Release the clips -arrows- and remove the cover -A- from the Adaptive Cruise Control Sensor -G550- -B-.