Access/Start Authorization Switch -E415-, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Ignition Lock Pliers VAS6339
NOTE:
Induction coil for immobilizer is secured to Access/Start Authorization Switch -E415- and cannot be replaced separately.
If induction coil is malfunctioning, Access/Start Authorization Switch -E415- must be replaced.
The immobilizer does not need to be adapted if the access/start authorization switch is replaced.
Lock in access/start authorization switch is not coded mechanically.
Keys must therefore not be replaced when access/start authorization switch is replaced; present keys continue to match.
WARNING:
Danger Of Unintended Engine Ignition
Turn off the ignition and remove the ignition key from the vehicle interior for all work performed on the high voltage vehicle.