LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 634 (EXTERIOR LIGHTS, SWITCHES (2 of 2) (CABRIOLET)) >> 94 Exterior Lights, Switches >> Parking Aid >> Parking Aid Control Module -J446-, Removing And Installing >> Removing

Parking Aid Control Module -J446-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Parking Aid Control Module Components
GWWA94-10728Courtesy of AUDI OF AMERICA, LLC

-- Turn off the ignition and remove the key.

-- Open the right luggage compartment side trim cover.

-- Disconnect the connectors -2 through 4-.

-- Remove the nuts -arrows-.

-- Remove the Parking Aid Control Module -J446- -1-.