LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 634 (EXTERIOR LIGHTS, SWITCHES (2 of 2) (CABRIOLET)) >> 94 Exterior Lights, Switches >> Headlamps >> Left/Right Hid Headlamp Control Module -J343- / -J344-, Removing And Installing >> Printed Circuit Board, Removing And Installing >> Notes

Printed Circuit Board, Removing And Installing: Notes

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Danger of causing damage to the vehicle electronics.

  • Requirement: Make sure nothing, especially metal or other light weight particles, can get into the headlamp housing.
  • Make sure also no oil, grease, silicone or other such materials can get into an open headlamp, otherwise they can turn into steam and fog up the headlamp.
  • Touching electronic circuits with bare hands can lead to migration.
  • ESD (electro static discharge) protection: Always follow standard DIN EN 613-40-5-1 when handling.
  • Do not use any components or electronics that have fallen down.
  • ESD (electro-static discharge) work surface VAS6613. Refer to ESD Work Surface VAS6613 . .
scientia non olet · About LEMON Manuals