Printed Circuit Board, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specification, refer to OVERVIEW - HEADLAMP, HID HEADLAMPS FROM MY 2013 .
Install In Reverse Order Of Removal. Note The Following:
-- Close the housing cover and secure with the clamp.
-- On the right: install the air filter housing, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .