Headlamp Range Control Module, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and remove the key.
-- Remove the glove compartment, refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
-- Release the retaining clip -arrow- and remove the -1- from the retaining frame.
-- Disconnect the connector -2-.
-- To disconnect the connector, press the tab -1-, turn the retaining bracket in direction of -arrow- and remove the connector.