Steering, Centering

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Centering the steering is meant only for "aligning" the steering for subsequent work.

The steering wheel center position is determined exactly via the steering angle with the help of the alignment computer.

If a steering wheel fault is determined when setting the center position of the steering, check the steering and suspension for damage or deformation and replace any damaged components. Check the tie rod symmetry as well, refer to MAXIMUM STEERING ANGLE, CHECKING .

-- Remove the noise insulation, refer to OVERVIEW - NOISE INSULATION .

-- Bring the steering gear into the center position.

The point -1- must be opposite the marking -2-. The distances of the tie rod ends to the steering gear must be the same at the left and right.

Fig 1: Hydraulic Power Steering Gear Steering, Centering

Courtesy of AUDI OF AMERICA, LLC

NOTE:

These designations only serve to assist in a general positioning of the steering center position.