Steering Gear

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Thoroughly clean connecting points and their surrounding areas before loosening.
Make sure the steering gear fits correctly when installing.
Place removed parts on a clean surface and cover them so that they do not get dirty. Use foil and paper. Only use lint-free cloths!
Install only clean parts: remove the replacement parts from their packaging just before installing them.
Use exclusively lubricants and sealants marked with part numbers.
Carefully cover or seal opened components if the repair will not be done immediately.