Overview - Vacuum Pump

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Vacuum Pump Assembly Overview

Courtesy of AUDI OF AMERICA, LLC

Torx 30 Bolt (Quantity: 2)
- Tightening specification: 9 Nm
- remove to remove the pump.
  NOTE:
  The pump is not designed to be disassembled.
Vacuum Pump
Vacuum Hose
- Secure with hose clamp appropriate to model, refer to parts .
Bolt
- Tightening specification: 5 Nm
  NOTE:
  Installing the bolt depends on the model.
  
  Alternatively, secure the vacuum hose with the hose clamp for the vehicle version, refer to parts .
O-Ring
- Replace
  NOTE:
  Installation of the O-ring depends on the model.
O-Ring
- Replace
  NOTE:
  Installation of the O-ring depends on the model.
O-Ring
- Replace
  NOTE:
  Installation of the O-ring depends on the model.