Electric Vacuum Pump, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Disconnect the connector -1- and remove it from the clip on the Brake System Vacuum Pump -V192- mount.
-- Release the vacuum hose -2- and remove it from the Brake System Vacuum Pump -V192-.
CAUTION:
Be careful not to damage the vacuum hose. Replace the vacuum hose if damaged.
-- Remove the nuts -arrows- and then remove the Brake System Vacuum Pump -V192- -1- upward.