Cap And Guide Pin, Replacing: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Grease the guide pin before inserting.
-- Slide the protective cap over the groove on the guide pin.
-- Slide the guide pin -8- with the protective cap -9- through the brake carrier.
-- Press the protective cap over the groove on the brake carrier.
-- Install the brake caliper.