Brake Caliper Piston, Removing And Installing, Single-Piston Brake: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Protective Cap From Brake Caliper With Trim Removal Wedge 3409

Courtesy of AUDI OF AMERICA, LLC

-- Use compressed air to push the piston out of the brake caliper housing.

NOTE:

Place a wooden board into the recess of the caliper housing so it is not damaged.

-- Remove the seal.

Fig 2: Identifying Seal With Trim Removal Wedge 3409

Courtesy of AUDI OF AMERICA, LLC

-- To do so, use the Trim Removal Wedge 3409.

NOTE:

When removing, make sure that surface of cylinder is not damaged.