Separating Points

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Lines to hydraulic assembly

Fig 1: Connecting Brake Caliper & Piston Circuit Lines

GWWA45-10013

Courtesy of AUDI OF AMERICA, LLC

-- Tighten hex collar nuts -1- through -4- to 14 Nm.

-- Tighten hex collar nuts -5- and -6- to 14 Nm.

Brake hose on brake caliper to front axle

Fig 2: Identifying Brake Hose, Retaining Spring & Brake Line

GWWA47-10024

Courtesy of AUDI OF AMERICA, LLC

-- Item -1- brake hose, ensure retaining tabs are seated correctly in bracket.

-- Item -2- retaining spring.

-- Tighten brake pipe line -3- to 14 Nm.

-- Brake line -1-

-- Item -2- retaining spring.

-- Item -3- - brake hose, ensure retaining tabs are seated correctly in bracket.

Fig 3: Identifying Brake Line, Retaining Spring & Brake Hose

GWWA47-10025

Courtesy of AUDI OF AMERICA, LLC

Brake line connection in wheel housing to front axle

Fig 4: Identifying Brake Line, Intermediate Piece & Brake Pipe Line

GWWA47-10022

Courtesy of AUDI OF AMERICA, LLC

-- Item -1- brake pipe line, 14 Nm tightening specification.

-- Item -2- intermediate piece.

-- Item -3- brake pipe line, 14 Nm tightening specification.