Overview - Fender
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Nut
- Tightening specification: 4 Nm
- Quantity: 3
- Mount
- For the bumper cover
- Removing and installing. Refer to BUMPER GUIDES, REMOVING AND INSTALLING .
- Fender
- Removing and installing. Refer to FENDER, REMOVING AND INSTALLING .
- Bolt
- Tightening specification: 10 Nm
- Quantity: 3
- Fender Brace
- Removing and installing. Refer to FENDER BRACE, REMOVING AND INSTALLING .
- Bolt
- Tightening specification: 10 Nm
- Quantity: 2
- Seal
- Inside on the fender
- Bolt
- Tightening specification: 1.5 Nm
- Bolt
- 8 Nm
- Bolt
- Tightening specification: 8 Nm
- Bolt
- Tightening specification: 8 Nm
- Quantity: 2
- Bolt
- Tightening specification: 10 Nm
- Quantity: 2
- End Plate
- Removing and installing. Refer to FENDER, REMOVING AND INSTALLING .
- Mount
- Quantity: 2
- There are different versions.
.
Vehicles through 09/2009
- Bolt
- Tightening specification: 1.5 Nm
Vehicles from 10/2009
- Expanding Rivet