Overview - Additional Reinforcement
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Tightening specification: 30 Nm
- Nut
- Tightening specification: 2.5 Nm
- Bolt
- Tightening specification: 30 Nm
- Right Reinforcement
- For the tower brace
- Removing and installing. Refer to TOWER BRACE REINFORCEMENT, REMOVING AND INSTALLING .
- Bolt
- Tightening specification: 30 Nm
- Nut
- Quantity: 2
- Tightening specification: 30 Nm
- Tower Brace
- Removing and Installing. Refer to TOWER BRACE, REMOVING AND INSTALLING .
- Nut
- Tightening specification: 30 Nm
- Quantity: 2
- Nut
- Tightening specification: 2.5 Nm
- Bolt
- Tightening specification: 30 Nm
- Left Reinforcement
- For the tower brace
- Removing and installing. Refer to TOWER BRACE REINFORCEMENT, REMOVING AND INSTALLING .