Transmission, Transporting

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Hook And Support Tool 3311 with bolt Hook and Support Tool - Bolt 3311/1
Shop Crane VAS6100

Procedure

Transmission removed.

CAUTION:

Transmission components could be damaged if they are not set down correctly.

Do not set the transmission on the ATF pan.

Fig 1: Securing Transmission To Hook And Support Tool 3311 And Holding Plate VW 309

Courtesy of AUDI OF AMERICA, LLC

WARNING:

An accident could result if the transmission is not secured correctly.

Exchange the bolt on the Hook and Support Tool 3311 for a new, longer bolt Hook and Support Tool - Bolt 3311/1.
Only this way can the transmission be secured.

-- Secure the transmission on the Hook And Support Tool 3311 (use new longer bolts Hook and Support Tool - Bolt 3311/1).

-- Lift and transport the transmission with the Shop Crane VAS6100.

NOTE:

Ignore Holding Plate VW309.