Overview - SUBFRAME Mount

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Tunnel Crossmember, Transmission Mount And Transmission Support

Courtesy of AUDI OF AMERICA, LLC

Nut
- 20 Nm
- Only remove if the transmission mount must be separated from the transmission support
Bolt
- 70 Nm
Bolt
- 40 Nm
Nut
- 20 Nm
Transmission Support
- Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING
Transmission Mount
- Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING
Lower Stop
- For the transmission mount
Bolt
- 20 Nm + 90° additional turn
- Replacing
- Only remove if the transmission mount must be separated from the transmission support
Tunnel Crossmember
- Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING