Selector Lever Transmission Range Position Display Unit -Y26-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Press the button on the electro-mechanical parking brake to activate it.
-- Move the selector lever into "S" or "D/S".
-- Carefully pry out the selector lever boot on the side using the Trim Removal Wedge 3409 or a small screwdriver -arrows- and then fold it upward.
-- Release the spring -2- and remove the Selector Lever Transmission Range Position Display Unit -Y26- -1- in direction of -arrow-.
Fig 2: Releasing Retaining Spring And Removing Selector Lever Transmission Range (TR) Position Display Y26 Upward
-- Disconnect the connector.