Overview - SUBFRAME Mount
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Nut
- Tightening specification: 20 Nm
- Only remove if the transmission mount must be separated from the transmission support
- Bolt
- Tightening specification: 70 Nm
- Bolt
- Tightening specification: 40 Nm
- Transmission
- Nut
- Tightening specification: 20 Nm
- Transmission Support
- Removing and installing, refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING
- Transmission Mount
- Removing and installing, refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING
- Lower Stop
- For the transmission mount
- Bolt
- 20 Nm + 90° turn
- Replacing
- Only remove if the transmission mount must be separated from the transmission support
- Tunnel Crossmember
- Removing and installing, refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING