LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 629 (Controls & Housing - Automatic Transmission 0BK) >> 37 Controls, Housing >> ATF Circuit >> ATF Pipes, Removing And Installing >> ATF Pipes, Removing And Installing, Vehicles With 3.0L TFSI Engine >> Removing

ATF Pipes, Removing And Installing, Vehicles With 3.0L TFSI Engine: Removing

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ATF Pipes Can Only Removed And Installed When Transmission Is Removed
GWWA37-10836Courtesy of AUDI OF AMERICA, LLC

-- Place the Used Oil Collection and Extraction Unit VAG1782 under the separating point.

-- Remove the union nuts -arrows-.

-- Seal the open lines and connections with clean plugs from the Engine Bung Set VAS6122.

-- Remove the ATF pipe.