Selector Lever Transmission Range Position Display Unit -Y26-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
-- Press the button on the electro-mechanical parking brake to activate it.
-- Move the selector lever into "S".
-- Carefully pry out the selector lever boot on the side -arrows- using the Trim Removal Wedge 3409 or a small screwdriver and then fold it upward.
-- Release the spring -2- and remove the Selector Lever Transmission Range Position Display Unit -Y26- -1- -arrow-.
Fig 2: Releasing Retaining Spring And Removing Selector Lever Transmission Range (TR) Position Display Y26 Upward
-- Disconnect the connector.