Secondary Air Injection Right Combination Valve, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications:

Refer to OVERVIEW - SECONDARY AIR INJECTION SYSTEM
Refer to Figure

NOTE:

Replace the seal.

The hose connections as well as the air guide pipes and hoses must be free of oil and grease before installing.

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

In order to be able to securely mount the air guide hoses on their connectors, spray the screws on the previously used clamps with a rust remover.

-- Install the right catalytic converter, refer to RIGHT CATALYTIC CONVERTER, REMOVING AND INSTALLING .

-- Install the tower brace, refer to TOWER BRACE, REMOVING AND INSTALLING .