Left Exhaust Manifold, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Oxygen Sensors Location, Cylinder Bank 2 (Left)

GWWA24-10568

Courtesy of AUDI OF AMERICA, LLC

NOTE:

When installing, bring all cable ties back to same positions.

-- Remove the left catalytic converter, refer to LEFT CATALYTIC CONVERTER, REMOVING AND INSTALLING .

-- Remove the Heated Oxygen Sensor 2 -G108- item -1-, refer to HEATED OXYGEN SENSOR 2 - G108 - / OXYGEN SENSOR 2 AFTER CATALYTIC CONVERTER - G131 -, REMOVING AND INSTALLING .

-- Remove the left engine mount, refer to LEFT ENGINE MOUNT, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and the left engine support.

Fig 2: Identifying Bolts

GWWA10-10939

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 4- and remove the heat shield.

Fig 3: Identifying Bolts & Heat Shield

GWWA26-10068

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -1- and -8- and the heat shield bracket.

-- Remove nuts -2 through 7- and -9- and remove the exhaust manifold.

Fig 4: Identifying Nuts, Bracket For Heat Shield & Exhaust Manifold

GWWA26-10069

Courtesy of AUDI OF AMERICA, LLC