Right Catalytic Converter, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
Tightening specifications:
- Refer to OVERVIEW - MUFFLER
- Refer to Figure
NOTE:
Replace the seals and self-locking nuts.
-- Install the right front muffler, refer to FRONT MUFFLER, REMOVING AND INSTALLING .
-- Install the Oxygen Sensor after Three Way Catalytic Converter -G130-, refer to HEATED OXYGEN SENSOR - G39 - / OXYGEN SENSOR AFTER THREE WAY CATALYTIC CONVERTER - G130 -, REMOVING AND INSTALLING .