LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 623 (3.0L - Engine Cooling System - Engine Code(S): CTUC & CTUD) >> 19 Cooling System >> Radiator/Coolant Fan >> Left Charge Air Cooling Circuit Radiator, Removing And Installing >> Installing

Left Charge Air Cooling Circuit Radiator, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

If there are small impressions on the fins, refer to COOLER AND CONDENSER ASSEMBLY .

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

-- Install the left front wheel housing liner, refer to OVERVIEW - FRONT WHEEL HOUSING LINER .

-- Install the left front wheel, wheel bolt tightening specification: 140 Nm. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

-- Fill the coolant, refer to COOLANT, DRAINING AND FILLING .

NOTE:

All of the coolant must be changed if the radiator was replaced.

scientia non olet · About LEMON Manuals