Front Radiator Charge Air Cooling Circuit, Removing: Removing
-- Remove the front bumper cover -1-, refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the bolts -arrows-.
-- Remove the air guide -1- and intermediate flange -2- from the air filter housing.
-- Open the retainers in direction of -arrows A- and move air guide -1- to the right to toward the center of the vehicle in direction of -arrow B-.
-- Place the Shop Crane - Drip Tray VAS6208 under the front charge air cooling circuit radiator.
-- Clamp off and remove the coolant hose using the Hose Clamps - Up To 25 mm 3094 by loosening the hose clamp -arrow-.
-- Remove the bolt -1-.
Ignore item -1-.
-- Press the catch downward -arrow A- and move the charge air cooling circuit radiator in direction of -arrow B-.
-- Remove the charge air cooling circuit cooler upward from the coolant cooler.