Cooling System, Checking For Leaks: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Cooling System Tester VAG1274B
Cooling System Tester - Adapter VAG1274/8
Cooling System Tester - Adapter VAG1274/9

Procedure

Fig 1: Identifying Coolant Reservoir Marking

Courtesy of AUDI OF AMERICA, LLC

Engine at operating temperature.

WARNING:

Risk of scalding due to hot steam and hot coolant.

The coolant system is under pressure when the engine is warm.
Reduce pressure by covering coolant reservoir cap with a cloth and carefully opening.

-- Open the coolant reservoir cap.

-- Position the Cooling System Tester VAG1274B with the adapter VAG1274/8 on the coolant reservoir.

Fig 2: Identifying VAG1274 B & VAG1274/8

Courtesy of AUDI OF AMERICA, LLC

-- Generate approximately 1 bar (14.5 psi) pressure using the cooling system tester hand pump.

-- If pressure falls, search for leaks and correct problem.