LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 623 (3.0L - Engine Cooling System - Engine Code(S): CTUC & CTUD) >> 19 Cooling System >> Coolant Pump/Thermostat >> Engine Temperature Control Temperature Sensor -G694-, REMOVING AND INSTALLING >> Removing

Engine Temperature Control Temperature Sensor -G694-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Intake Manifold Lower Section Bolt/Nut
GWWA24-10349Courtesy of AUDI OF AMERICA, LLC

-- Remove the right lower section of the intake manifold, refer to INTAKE MANIFOLD LOWER SECTION WITH FUEL RAIL, REMOVING AND INSTALLING .

-- Disconnect the connector -2-.

-- Remove the Engine Temperature Control Sensor -G694- item -1-.

Fig 2: Engine Temperature Control Sensor -G694 & Connector
GWWA15-10924Courtesy of AUDI OF AMERICA, LLC