Left Coolant Pipes, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications, refer to OVERVIEW - COOLANT PIPES .

NOTE:

Replace the O-ring.

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

-- Clean and smooth the O-ring sealing surface.

-- Coat the O-ring with coolant and slide it onto the coolant pipe.

-- Install the A/C compressor bracket, refer to OVERVIEW - RIBBED BELT DRIVE -item 11- Bracket.

-- Install the A/C compressor, refer to A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET .

-- Fill the coolant, refer to COOLANT, DRAINING AND FILLING => .