LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 621 (3.0L - Lubrication - Engine Code(S): CTUC & CTUD) >> 17 Lubrication >> Oil Pan/Oil Pump >> Oil Pump, Removing And Installing >> Installing

Oil Pump, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seal and O-ring.

-- Install oil pump onto the drive axle and fasten.

-- Install the oil pan lower section, refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .

-- Fill the engine oil and check the oil level, refer to ENGINE OIL LEVEL, FILLING AND CHECKING .