Engine Oil Cooler, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front noise insulation -1-, refer to OVERVIEW - NOISE INSULATION .

-- Remove the bolt -1- and nut -3- and the lock carrier left brace -2-.

Fig 2: Identifying Carrier Left Brace Components

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the coolant hoses -1- and -2- with Hose Clamps up to 25 mm Diameter3094.

-- Open the clamp and remove the coolant hose -1- and, if necessary, -2- from the oil cooler.

-- Place the Used Oil Collection and Extraction Unit SMN372500 under the engine.

-- Remove the bolts -arrows- and remove the engine oil cooler.

Fig 3: Locating Oil Cooler

Courtesy of AUDI OF AMERICA, LLC