Engine Oil Cooler, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specification, refer to OVERVIEW - OIL PAN/OIL PUMP .

NOTE:

Replace the seal.

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

-- Install the lock carrier brace, refer to LOCK CARRIER BRACE, REMOVING AND INSTALLING .

-- Check the oil level, refer to ENGINE OIL LEVEL, FILLING AND CHECKING .

-- Fill the coolant, refer to COOLANT, DRAINING AND FILLING .

-- Install the noise insulation, refer to OVERVIEW - NOISE INSULATION .