LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 621 (3.0L - Lubrication - Engine Code(S): CTUC & CTUD) >> 17 Lubrication >> Crankcase Ventilation >> Oil Separator, Removing And Installing >> Removing

Oil Separator, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Left Lower Intake Manifold
GWWA24-10349Courtesy of AUDI OF AMERICA, LLC

-- Remove the crankcase ventilation hoses, refer to CRANKCASE VENTILATION HOSES, REMOVING AND INSTALLING .

-- Remove the upper coolant pipe, refer to UPPER COOLANT PIPE, REMOVING AND INSTALLING .

-- Remove the left lower section of the intake manifold, refer to INTAKE MANIFOLD LOWER SECTION WITH FUEL RAIL, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

-- Remove the high pressure lines and oil separator cover -1-.

Fig 2: Identifying Oil Separator Cover
GWWA17-10207Courtesy of AUDI OF AMERICA, LLC