Engine Codes, Transmission Allocations, Ratios And Capacities

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

The following information can be found in the electronic parts information.

Transmission fluid specification
Flange shaft allocation
The dual mass flywheel allocation
Clutch disc and pressure plate allocation
Rear final drive allocation using code and PR number

Manual Transmission		6-speed 0B4 AWD
Identification codes		JJQ	KMV	LPC
Manufactured	from	06.07	06.07	05.10
	through	03.10	05.10
Allocation	Type	Audi A5 2008 →	Audi A5 2008 →	Audi A5 2008 →
	Engine	4.2L - 260 kW	4.2L - 260 kW S5	4.2L - 260 kW S5
Ratio	Final drive	29 : 8 = 3.625	29 : 8 = 3.625	29 : 8 = 3.625
	Intermediate drive	31 : 29 = 1.069	31 : 29 = 1.069	31 : 29 = 1.069
Z_{2 :} Z₁ =i	1st Gear	33 : 9 = 3.667	33 : 9 = 3.667	33 : 9 = 3.667
	2nd Gear	41 : 19 = 2.158	41 : 19 = 2.158	41 : 19 = 2.158
	3rd Gear	38 : 25 = 1.520	38 : 25 = 1.520	38 : 25 = 1.520
	4th Gear	34 : 30 = 1.133	34 : 30 = 1.133	34 : 30 = 1.133
	5th Gear	34 : 37 = 0.919	34 : 37 = 0.919	34 : 37 = 0.919
	6th Gear	35 : 45 = 0.778	35 : 45 = 0.778	35 : 45 = 0.778
	Reverse gear	29 : 9 = 3.222	29 : 9 = 3.222	29 : 9 = 3.222
i_ges in the highest gear		3.014	3.014	3.014
Capacity		3.8 liters