LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (General, Technical Data - Manual Transmission 0B4 AWD (Coupe) (As Of 11.2010)) >> 00 General, Technical Data >> General Information >> Rear Final Drive 0BC, 0BF And 0BE Identification >> Notes

Rear Final Drive 0BC, 0BF And 0BE Identification: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

The following rear final drives are assigned to the 0B4 AWD manual transmission, depending on the version and engine type, refer to:

REAR FINAL DRIVE 0BC 

REAR FINAL DRIVE 0BF AND 0BE 

NOTE:

When installing a new rear final drive unit, the final drive code, the PR number and the vehicle engine code must be verified in the electronic parts information. This is the only way to assure the correct allocation.