Timing Mechanism Drive Chain, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- The transmission is removed, refer to TRANSMISSION, REMOVING AND INSTALLING .
-- Remove the lower timing chain cover, refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .
-- Remove the camshaft timing chains from the camshafts, refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
-- Remove the power take-off drive chain, refer to POWER TAKE-OFF DRIVE CHAIN, REMOVING AND INSTALLING .
-- Press the drive chain tensioner guide rail in the direction of -arrow- and secure the chain tensioner with a Locking Pin T40071.
CAUTION:
Risk of destroying due to reversed running direction on a used drive chain.
- Mark the drive chain running direction with arrows using paint for installation later. Do not mark the drive chain with a punch, notch or something similar.
-- Remove the bolts -1- and the guide rail.
-- Remove the bolts -2- and the chain tensioner.
-- Remove the timing mechanism drive chain.