LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 616 (3.2L - Ignition System - Engine Code(S): CALB (As Of 01.2014)) >> Ignition System >> Ignition System >> Knock Sensor, Removing And Installing >> Installing

Knock Sensor, Removing And Installing: Installing

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Install the removed knock sensor.

NOTE:

The tightening specification influences the function of the knock sensor.

-- Install the lower intake manifold section with the fuel rail, refer to INTAKE MANIFOLD LOWER SECTION WITH FUEL RAIL, REMOVING AND INSTALLING .

-- Reinstall the intake manifold upper section, refer to INTAKE MANIFOLD UPPER SECTION, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals