Overview - Wheel Cover
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Front Bumper Cover
- Fender
- Wheel Housing Cover for Fender
- There are different versions.
- Removing and installing. Refer to WHEEL COVER, VERSION 1, REMOVING AND INSTALLING .
- Clamp
- Quantity: 9
- Fender Cover
- There are different versions.
- Removing and installing. Refer to WHEEL COVER, VERSION 2, REMOVING AND INSTALLING .
- Wheel Housing Cover for Bumper Cover
- There are different versions.
- Removing and installing. Refer to WHEEL COVER, VERSION 1, REMOVING AND INSTALLING .
CAUTION:
- The adhesive surfaces on the body must be free of dirt and grease.
- Clean the adhesive surfaces using Cleaning Solution D 009 401 04.
- Warm the adhesive surfaces to approximately 40 °C (104 °F) using a hot air blower.
- After installing, take the roller and press the covers one more time.