Overview - Glove Compartment

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Glove Compartment

Courtesy of AUDI OF AMERICA, LLC

Storage Compartment
- Equipment levels
- Removing and installing. Refer to GLOVE COMPARTMENT STORAGE COMPARTMENT, REMOVING AND INSTALLING .
Glove Compartment Lamp -W6-
- Removing and Installing. Refer to Lamps .
Footwell Lamp
- Equipment levels
- Removing and installing. Refer to Lamps
Passenger Side Instrument Panel Cover
- Removing and installing. Refer to FRONT PASSENGER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
Bolt
- 3 Nm
- Quantity: 2
Hinge Pin
- For securing the glove compartment cover
Glove Compartment
- Removing and installing. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
Brake Component
- For the glove compartment lid
- With Glove Compartment Lamp Switch -E26-
- Removing and installing. Refer to GLOVE COMPARTMENT LID BRAKING ELEMENT, REMOVING AND INSTALLING .
Hinge Pin
Spring Nut
Bolt
- 3 Nm
Front Passenger Airbag Deactivation Key Switch -E224-
- Not for North American market.
Bolt
- 3 Nm
- Quantity: 4 or 5 depending on the country
Cold Air Vent/Blind Cover
- Equipment levels
Bolt
- 3 Nm
- The quantity depends on the equipment level or the country
Glove Compartment Cover
- Removing and installing. Refer to GLOVE COMPARTMENT LID, REMOVING AND INSTALLING .
Glove Compartment Opener
- Removing and installing. Refer to GLOVE COMPARTMENT HANDLE, REMOVING AND INSTALLING .
Stop Buffer
- For the glove compartment lid