Glove Compartment Lid, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Glove Compartment Lid

Courtesy of AUDI OF AMERICA, LLC

-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .

-- Remove the hinge pin from the brake component. Refer to REMOVING , -1- Hinge bolt (See Figure).

-- Set the glove compartment down with the top side on a soft surface.

-- Drive the left and right hinge pins out using a 2 mm hex socket wrench -item 1- (or another suitable tool) -arrow-.

-- Remove glove compartment cover -2- from the glove compartment.