Towing Recognition Control Module -J345-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Connector Retaining Clips

Courtesy of AUDI OF AMERICA, LLC

-- Turn off the ignition and remove the key.

-- Open the right luggage compartment side trim panel.

-- Release the retaining clips -arrows-.

-- Remove the Towing Recognition Control Module -J345- -4- from the frame.

-- Disconnect the connectors -1, 2 and 3-.